Rapid Mixer Granulator is designed to achieve excellent mixing & consistent granules at lower operating cost along with higher productivity. Better mixing closed control of granules size leads to faster tableting speeds with improved quality & least ejections.
Features
- All contact parts are made out of S.S.316 as per GMP standard.
- The mixing bowl is with conical top and lid lifting is pneumatically operated.
- The main drive shaft is connected to the gear bare shaft through extra bearing housing.
- Hopper is inserted horizontally through the wall of the bowl to break the product to granules of required size which rotates at two speeds 1500/3000 RPM.
- The granulator shaft where it enters the bowl incorporates air purged seal similar to the one provided in the main drive.
- Machine available in flameproof and non flameproof models. Machine has two panels main panel and operating panel
- Uniform distribution of all formulation ingredients.
- Short mixing and granulation time.
- Useful working capacity of upto 80% to 40% of bowl volume.
- Drying under vacuum, at lower temperature with solvent recovery system.
- Three blades Design for efficient mixing with a high speed granulator (chopper) is inserted horizontally through the wall of the bowl to assist blending of powder and to break the product to granules of required size.
- Platform is SS 304 which is dimpled for anti slip property entire stand is also cladded by SS 304
- Chopper housing is entirely made from SS 304 having air purging and special seals. Discharge piston has face sealing matching the vessel interior.
- Lifter can be fitted for loading of material.
- 5 microns filter assembly will be provided on top lid in stainless steel housing to eliminate dusting in granulation area.
- PLC with touch screen MMI with printing facility.
- VFD can be provided to change the RPM of impeller .
