CSSD Equipments

 

 

Horizontal Rectangular Autoclave

Horizontal Rectangular Autoclave with ISI (IS3829) Part I Marked

Inner Chamber
SS 316
Steam Jacket
SS 304
Working pressure
1.2kg/cm2 & 2.1kg/cm2
Working Temperature
121°C / 134°C
Door
Single door with Radial locking system
Mode of control
With a multiport valve / Automatic Optional
Pre-vacuum and Post vacuum
To eliminate air packs and ensure effective sterilization.
Water protection
In the event of low water the supply to the heaters is discontinued automatically and visually indicated in the control panel.
Pressure switch
An automatic pressure switch adjustable type is provided to set the required pressure.
Vacuum drying
An effective vacuum drying is caused with powerful ejector and vacuum breaker which draws air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
Water Gauge glass
To note down the level of water glass tube with gauge is provided.
Gasket
Silicon Expansion type
INSTRUMENTATION:
  • Safety Valve
  • Vacuum Breaker
  • Non Return Valve
  • Steam Trap
  • Water inlet and Water outlet Valves

Sequence of Automatic operation includes the following;

  • Automatic water filling for the steam generator
  • Leak test for required time and results with alarm will displayed and data logged.
  • Bowie- dik test
  • Spore-test results from approved lab submitted
  • Pulsing ( vacuuming, purging and pre-heating)
  • Sterilization with temp and balance time displayed and data logged
  • Exhaustion appropriate to liquid, instruments and fabric cycles.
  • Drying cycle with vacuum pump.
  • Final cooling with admission of filtered air (0.01 Micron)
  • Sterilization completes with F.O values Displayed and data’s logged.

CGmp Documentation (DQ, IQ, OQ and PQ) will be supplied

  • High Vacuum with vacuum pump
  • Fully Automatic Micro processor or PLC based programmable with solenoid valve operation.
  • Suitable for Liquid, Instruments and Fabric cycle Suitable SS Trolley and SS Carriage
  • Data Logging System
  • Double Door System
  • Vertical/Horizontal Sliding door
  • Pulsing Controller

 

Model Chamber mm Dia x Deepmm Volume ltr Voltage Power kw Dimension W x L x HT mm Door Lock
HR1636 400X400X900 144 440 9 810X1500X1800 Radial
HR1836 450X450X900 182 440 12 675X1500X1800 Radial
HR224 600X600X1200 432 440 18 835X1800X1900 Radial / Sliding
HR234 600X900X1200 648 440 24 835X1800X1900 Radial / Sliding
HR235 600X900X1500 810 440 36 835X2100X2000 Radial / Sliding
HR334 900X900X1200 972 440 36 1125X1850X2000 Radial / Sliding
HR335 900X900X1500 1215 440 36 1125X2100X2000 Radial / Sliding

 

High Speed Cylindrical Autoclave

Horizontal Cylindrical High Speed Autoclave

Inner Chamber
SS 316
Steam Jacket
SS 304
Working pressure
1.2kg/cm2 & 2.1kg/cm2
Working Temperature
121°C / 137°C
Door
Single door with Radial locking system
Mode of control
With a multiport valve / Automatic Optional
Pre-vacuum and post vacuum
To eliminate air packs and ensure effective sterilization.
Water protection
In the event of low water the supply to the heaters is discontinued automatically and visually indicated in the control panel.
Pressure switch
An automatic pressure switch adjustable type is provided to set the required pressure.
Vacuum drying
An effective vacuum drying is caused with powerful ejector and vacuum breaker which draws air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
Water Gauge glass
To note down the level of water glass tube with gauge is provided.
Gasket
Silicon Expansion type
INSTRUMENTATION:
  • Safety Valve
  • Vacuum Breaker
  • Non Return Valve
  • Steam Trap
  • Water inlet and Water outlet Valves

Supply Voltage
440 volts – 3 phase
Electrical Load
18 KW
Sequence of Automatic operation includes the following:
  • Automatic water filling for the steam generator
  • Leak test for required time and results with alarm will displayed and data logged.
  • Bowie-dik test
  • Spore-test results from approved lab submitted
  • Pulsing ( vacuuming, purging and pre-heating)_ Optional
  • Sterilization with temp and balance time displayed and data logged
  • Exhaustion appropriate to liquid, instruments and fabric cycles.
  • Drying cycle with vacuum pump. – Optional
  • Final cooling with admission of filtered air (0.01 Micron)
  • Sterilization completes with F.O values Displayed and data’s logged
  • High Vacuum with vacuum pump
  • Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle
  • Data Loging System
  • Double Door System
  • Pulsing Controller

Diameter(mm) Deep(mm) Electric Power Models
400 600 18Kw HS 1624
500 900 18Kw HS 2036

 

ETO Sterilizer

Specification

Rectangular chamber & pipeline
SS 304
Working Temperature
Working Temperature : 37°C & 55°C
Mode of Operation
Manual / Automatic
Gas Injection
Cartridge
Insulation
Glass Wool 25 - 50mm Full
Enclosure
Cabinet Type with Powder Coated
Temperature Controller
Digital, RTD Type
Door
Single Point Locking System
Vacuum Pump
Vane Type Oil Type
Control
Individual push button for vacuum pump, gas Puncturing ,vacuum breaker and heating with digital PID controller
Compressor
Oil free compressor
Operating voltage
230 voltage /50 khz
Non Hazardous
Total cycle under negative atmosphere

Optional:

1) Automatic PLC Based automation with data logging system

Model Size mm Volume ltr Power Kw Voltage Dimension WXLXHT mm
Eto54 300x300x600 54 2.5 220 700x1150x1800
Eto80 300x300x900 80 3 220 700x1300x1800
Eto100 300x300x1150 100 4 220 700x1500x1800

 

Ultrasonic Cleaner

The Ultrasonic cleaners are manufactured using Solid state technology for the Ultrasonic generator and PZT transducers for converting the electrical energy to mechanical vibration in the cleaning liquid. The bonding is done by using weld bond method to ensure better efficiency and longer life. The ultrasonic energy thus converted creates cavitation’s in the cleaning liquid and when the cavities implode the cleaning is effected on the articles immersed in the cleaning liquid. Suitable cleaning agent is used depending on the contamination and the material to be cleaned.

Drying Cabinet

  • Digital timer Controlled Drying Cabinet with single door suitable for easy and quick drying of instruments, utensils, glass and anesthetic accessories such as corrugated hoses, breathing masks, respiration bags and surgical instruments trays etc.
  • The unit is provided with digital display with countdown drying time and drying time selectors, temperature selector including indication of selected temperature.
  • The drying cabinet is provided with a quick lock door with heat resistant Silicon Expansion gasket
  • The chamber is designed to allow uniform air circulation which is done by an impeller
  • The system has an adjustable temperature range of 60-90°C with drying time range of 0-90 minutes.
  • The exhaust is provided to ensure complete removal of moisture

 

Hot & Cold Sterilizer

Hot and Cold Sterilizer

  • Stainless Steel Hot & cold Sterilizer with separate Hot & cold sterile water
  • Aseptic devices include self- sterilization & elimination of water recontamination.
  • Cold water sterilizer is fitted with a cooling coil for circulation of water from the main.
  • Operation on electricity( 12KW).
  • Unit rests on elegantly finished tubular stand
  • The unit consist of individual controls such as safety valves, pressure gauge, steam trap, self-sterilizing water filter , water level indicator and air filter.

 

Size: 30 - 50 liters capacity

 

Spray Gun Rinser

 

Spray gun rinser with 8 different attachments used for cleaning syringes , catheters, endoscopes, cystoscopies and variety of other instruments and articles used in sterile services.

 

Washer Disinfector

Washer Disinfector, Single/Double door, suitable for cleaning and disinfection of surgical instruments, anesthetic equipment, suction bottles, cleaning buckets, general circulation goods, dental tray

 

Feeding bottles, Kidney basins, Dressing bowls, Anesthesia tubing and glass should be with a fully closed process.

 

Fully automatic with advanced microprocessor based which controls all services, programming and statistic functions. The door is provided with interlocking system and expansion type Silicon gasket seal. The chamber is equipped with four spray arms which ensures good water penetration from all directions. Dosage of detergent can be preset with dosing pump.

 

Sealing Machine

  • Suitable for hospital sterile packing
  • Seals plastic film of various materials such as PE, PP, Aluminum foil etc.
  • Emboss upto 15 interchangeable characters for batch recording, date etc
  • Speed control mechanism
  • Temperature control mechanism
  • Height and width mechanism

 

Gauge Cutting Machine

The equipment is elegant, sturdy built to cut the thickest of cloth material like cotton, synthetic, vinyl, plastic, leather, denim, corduroy, jute and canvas.

 

The cutting machines operates on a single phase motor and consists of a cutting unit and a knife sharpening unit that gives a finely honed edges to the cutting blade on the touch of a control button.

 

Let Us Contact You

Contact Us

Address : No 217, SIDCO Industrial Estate, North Phase, Ambattur, Chennai – 600 098. India
Phone:– 044 - 26244383, 26244393
Mobile:+91-9962567028, 9962567020
Email Id: reico@relianceinstruments.com

Privacy Policy : Your personal information(Name, Email, Phone, Query) submitted will not be sold, shared or rented to others. We use this information to send updates about our company and projects and contact you if requested or find it necessary. You may opt out of receiving our communication by calling us on any of our above mentioned contact numbers or by clicking on the unsubscribed link mention in mail.