Multi mill is used for high speed Granulating, Pulverizing, Mixing, Shredding and Chopping, etc, of a wide range of wet and dry materials without special attachments. This machine utilizes the principle of variable force swing hammer blades having both knife and impact edges rotating with a carefully selected screen to control size reduction. The material is dropped axially from a feed hopper in to the commutating chamber where it comes in contact with blades rotating at high speed. Differentially edged blades in desired direction of rotation achieve shear. Material Entering the chamber is imparted to the periphery and passes through the circular screen tangentially and radically achieving size reduction.

Technical Specifications

• Output 50 kgs To 200 kgs/ Hour.
• Rotor Assembly Diameter 250 (Approx)
• Rotor Speed 750/1500/2300/3000 R.P.M.
• Beaters 12 knife & impact edges & 2 Scrapper Blades
• Screen Dimensions INNER DIAMETER – 260 mm HT- 135mm
• Motor 3.0 HP / 5.0 HP, 440 V 50Hz, 3 Phase
• Material Charging Height 1445 mm (Approx)
• Overall Dimensions (mm) 880 x 955 x 1650 mm (H)
• Net Weight 275 KGS (Approx)
• Gross Weight 425 KGS (Approx)
• Case Dimensions (mm) 1200 mm X 1250 mm X 1860 mm (H)

Features

• Beaters and shaft are made of stainless steel 316 quality and beaters are further hardened & Beaters are fitted on a shaft.
• Efficient de-burring & de-dusting and full suction of excess powder
• Direction of beaters can be changed by reversible switch.
• Beaters assembly is swing type, dynamically balanced which reduces vibration and noise level and increases bearing life.
• 12 nos. Beaters are of knife and impact edges & 2 nos. beaters are of scrapper blades types.
• All contact parts are made of SS 316 as per cGMP Standard and can be easily & quickly dismantled and cleaned.
• Multiple combinations of Screens / Speeds / Number of Blades
• Built in Variable Frequency Drive for multiple speeds
• Castors are provided for mobility of the machine